Submit article

Filters

Find by keywords

"osh in large public facilities"
UAV  photogrammetry  offers  a  powerful  and  cheap  methodology  to  reconstruct  the  terrain  geomorphology. The purpose of this study is the application of a generic Structure-from-Mo-tion  workflow  to  properly  elaborate  different  set  of  images  from  multitemporal  surveys  to  perform a surface and volume change detection by meaning of a cloud-to-cloud comparison. The  complex  geomorphology  of...

A previous article relating to a series of outcrops of an Oligocene sandstone (Macigno) located in Tuscany along a N-NW S-SE band, illustrated that the compression strength values measu-red with the Schmidt Hammer gradually decreased from north to south. This study applies the same criteria and methods to the outcrops of another sandstone (Pietraforte = Strong Stone) belonging to the geological formation of the Super Gruppo della Calvana from the Cretace-ous-Eocene age. The results reveal a similar trend for the outcrops between Poppi (lat. 43°45’)...

Rockfall is one of the most hazardous and dangerous landslide phenomena, which can significantly affect mountain roads. To the knowledge of the Author, limited studies focus on the quantitative risk assessment to pedestrians (hikers) and vehicles along mountain little traffic roads. A method tailored to these elements at risk is herein presented and applied to a real case. The calculation method is based on the Event-Tree Analysis, through which all the scenarios which can lead to a fatality or injuries are investigated. An application on a study...

In the last years, energy transition from fossil fuels to renewable resources has been largely acknowledged as a necessity to reduce emissions of greenhouse gases in the atmosphere. Hydrogen, the simplest element on Earth, can play an important role in this transition. It is not as an energy source but rather as an energy carrier: in layman’s terms, electricity is converted in chemical energy, which can then be converted again in electricity or in green methane, if combined with carbon...

Italian glaciers began to melt in the second half of the 19th century. The quantification of melting over time has been described in Glaciers Inventories. The present research aims to contribute to the understanding of the dynamics governing glacier melting as a function of different glacier types and geomorphological parameters analysed in GIS environment. The extent variation of 13 Italian glaciers...


The article examines the peculiarities of creation (updating) digital topographic maps of the scale 1:50 000 for the Main State Topographic Map of Ukraine for creation and maintaining the seamless topographic database for national needs, which is located on the Geoportal to ensure the development of the National Spatial Data Infrastructure (NSDI) in Ukraine. Several special problems were identified along...


When it comes to human health and safety, the extractive industry represents one of the most hazardous activities. When accidents occur in mines, quarries or processing plants, consequences are usually very serious. A description of Italy’s state of the art is made herein, with a special focus on occupational injuries occurred during the 2012-2019 period of time as well as fatal injuries of the last...


One of the major concern for the gas sequestration/storage feasibility in natural underground formations is the assessment of the sealing efficiency of the low-permeable sequences overlying potential storage formations. The sealing efficiency is quantified via the threshold pressure and/or residual pressure difference parameters; the experimental laboratory procedures for their evaluation have been widely...


The present research has been aimed at the analysis of contaminated areas in which it is difficult to reconstruct the contamination with the classical techniques of interpretation of the hydrochemical data in time, for example when, at irregular intervals, secondary pollutants are separated from the main contamination and attracted by local piezometric depressions. To address the problem, an area near...


It is well known that climatic factors can influence the degradation of rocks in different geographic environments, thus affecting the durability of natural construction materials. Research has been carried out to assess the current state of natural degradation of an Oligocene-Miocene lithic greywacke occurring without appreciable lithological and mineralogical variations from, NW to SE in Tuscany (northern...


The fragmentation process of the falling blocks is a key aspect in the study and the simulation of rockfall phenomenon. The single blocs can generate fragments, deviating their trajectory, modifying their energy. The present research describes an application of a fractal fragmentation model on a real study case and identifies the main issues that can rise. A multi-objective procedure to define model parameters...


Mechanical behaviour of clastic formations at shallow – medium depths which bear hydrocarbon reservoirs could exhibit an important non-linear influence of the strain on the formation stiffness during depletion. Particularly in the early reservoir production stage, characterized by high uncertainty and little ground movement data for back-analysis, reliable determination of formation stiffness at...


The residual presence of critical components (e.g. Asbestos Containing Materials – ACMs) still represents one of the main criticalities for the Occupational Safety and Health – OS&H in many large public facilities. The very first step for an effective Risk Assessment and Management is obviously a clear definition of the different approaches, complying with the Italian general and special OS&H...


Indoor Air Quality (IAQ) is related to human health and well-being since people spend most of their working and free time in interior spaces. As stated by the World Health Organization (WHO), once complying with normative Occupational Safety and Health (OS&H) limits, more elevated standards of air quality both in productive and non-industrial workplaces should be guaranteed. In this case study –...


The large use of nanomaterials in several industrial processes drove the attention toward the potential health issues associated to their diffusion in the environment. However, since nanomaterials are characterized by a polidisperse particle size distribution, the human health risk induced by a nanoparticle (NP) contamination cannot be assessed through the ASTM procedure commonly used for chemicals. Toxicity...


The building sector is considered strategic to reach new scenarios for a low-carbon society. Beside this awareness, in the current trend there is not a real change to achieve targets set in terms of emissions containment defined by international agreements. Through an econometric model based on Choice Experiments, the present study aims to understand the individuals’ perceptions towards energy retrofit...


The inflow into aquifers of transition metals leached from muck disposed in quarries is a process that requires a detailed analysis in the framework of the environmental impact studies of dump sites. It is important to thoroughly examine the risks of potential contamination of pre-existing groundwater wells and, more in general, to assess the risk of qualitative deterioration of nearby shallow aquifers....


The proposal of a simplified hybrid Thermo-Hydro-Mechanical model to investigate poroelastic and thermoelastic stresses induced due to water injection and the different parameters affecting their evolution is presented. The operating mode of the numerical model is starting with a set of implicit fractures, with different adjustable random orientations, then an elastic continuum medium is built, and shear...


In 2017 the production of municipal solid waste in Europe-28 reached 2500 Mt, destined to recycling (48%-wt), incineration and thermal valorization (28%-wt) and landfilling (24%-wt). About 19 Mt per year of residual material, defined bottom ash, were produced by thermo-valorization plants in Europe. Physicochemical features of bottom ashes make possible their treatment through full-scale technologies....


Pulp and paper mills are characterized by emissions of malodorous gases that commonly create discomfort for people, also in little concentration in the air. This issue is crucial for enterprises that are not actually using the best available technology for reducing non-condensable gases. Thereby, for existing enterprises, it is very important to realize the proper suitable upgrading by choosing the best...


Aerogels are emerging as one of the most intriguing and promising groups of microporous materials, characterized by impressive properties such as low density, high surface area, high porosity and tunable surface chemistry. Fostering unique thermal and acoustic insulation features, for several decades they mainly received attention from the aerospace and building sectors. More recently, new great opportunities...


The paper presents the results of an experimental campaign carried out at the Sasso Poiano mine, close to Varese, northern Italy. The area is near a historic site, inhabited villages and a well-known lake, so that the use of explosive is subject to severe restrictions imposed by Italian standards. The exploitation is therefore carried out by blasting with low specific charge (PF=50 g/m3) in order to obtain...


The two-component backfilling system is the most frequently used method to fill the annular gap created during the shield machine advancement. This gap, due to the head overcut, the shield thickness and conicity and the tail brushes size should be filled continuously in order to avoid mainly surface displacement and linings movements. Nowadays this technology is the most chosen due to operative (both...


Territorial transformation projects are subject to specific evaluation procedures that address the question of whether the planned course of actions can achieve objectives in the presence of specific constraints. The uncertainty that characterizes the development process is of particular importance in investment decision-making, Indeed, the model’s input (for example, the costs of construction, the...


In mature oilfields, decommissioned oil and gas wells with depths reaching approximately 5000-6000 metres represent good candidate structures for geothermal heat exploitation, as they can provide useful access to subsurface geothermal energy resources. Comprehending the possibility to economically harness geothermal energy by means of coaxial WBHEs is bound to the main features of the physical model,...


This paper presents a quick and multiparametric method for shallow landslides susceptibility and hazard zoning, based on the principles of the Rock Engineering System (RES). The implementation of this methodology is achieved through the identification of the most sensitive triggering parameters and the study of their interrelationships. An interaction matrix is used to define a susceptibility index. The...


Rockfall net fences are multicomponent protection devices for mitigating rockfall hazard. As passive measures, they are used to intercept and stop rock blocks propagation after their detachment from a cliff or a slope. During their design working life, net fences subjected to ageing phenomena, corrosion and impact loads, causing their efficiency loss or even their effectiveness. A multi-matricial procedure...


This article aims to provide a glance about the current and future applications of Big Data Analytics (BDA) within the Oil&Gas industry, which is searching for an improvement in data managing equal to the improvement in techniques and technologies required by current and future hydrocarbon production. The connection and compatibility of BDA with the hydrocarbon sector is analyzed, highlighting its...


The rapid development of the mechanized tunneling in current decades has raised serious concerns about the environmental impact of large quantities of the muck. EPB-TBMs require the use of foaming agents for optimizing the soil conditioning. These agents could contain some chemicals (e.g., sodium lauryl ether sulfate – SLES) that are not included in the current legislation at the Italian or EU level....


This paper concerns the evolution of the quality of the groundwater bodies over space and time, with special focus on nitrate. This case study deals with the qualitative status in alluvial-pyroclastic groundwater bodies located near Naples (southern Italy). The study is based on a significant hydrochemical database, gathered through: (i) groundwater sampling and water level monitoring, (ii) chemical...


The Lombard territory (Italy), characterized by a historical process of industrialization, is affected by significant contamination both of the ground and of the groundwater. The continuous development of urban areas needs to face the problem linked to the growing presence of portions of the territory where there is the presence of contaminated groundwater (mainly chlorinated solvents and hydrocarbons),...


Deep aquifers represent a strategic resource because of their quality, generally better than rivers and shallow aquifers. More specifically, in Piedmont Region (Italy) they represent a key source of drinking water and therefore must be protected from qualitative and quantitative degradation.

In...


The groundwater overexplotation is a worldwide problem and it causes serious consequences such as land subsidence, saltwater intrusion, devastating effects on natural streamflow, groundwater fed wetlands and related ecosystems.

The Maggiore Valley (NW...


Extractive waste (EW) from abandoned mines can pose serious pressure to natural water systems. The harmful effects of EW such as deterioration of water sources by allowing leaching of potentially toxic elements (PTE) into groundwater make it necessary to carry out careful, scientific and comprehensive studies on this subject. The present research used risk analysis approach to study the effect of presence...


Geothermal Energy, being a clean and sustainable source of energy, is gaining importance worldwide due to various reasons. Geothermal power can be generated throughout the year on twenty four hour basis as it’s not much dependent on ambient temperature and weather conditions. Recently there is an increased interest in exploitation of low enthalpy geothermal resources for other applications such as geothermal space heating...


The residual presence of critical components (e.g. Asbestos Containing Materials – ACMs) still represents one of the main criticalities for the Occupational Safety and Health – OS&H in many large public facilities (Lee and Van Orden, 2007).

Since...


The main purpose of developing OSH Management System is to create a sustainable system that does not rely solely on a specific person with OSH expertise. This concept is the core of the International Organization for Standardization – ISO standards which promote the creation of a sustainable system based on the assumption that humans make mistakes. Then, it is argued that government regulations may...


The management of health and safety at work is represented by the set of preventive and protective measures to minimize the exposure of workers to risks that may cause the onset of diseases or increase the number of accidents.

Data on occupational accidents...


The rapid spread of the Industry 4.0 technologies is deeply changing workplaces. In order to achieve the so-called Forth Industrial Revolution, several open issues have to be faced, concerning technologies, enterprise organization and knowledge. Automation systems are already replacing men in manual, repetitive tasks: both shop-floor and office operations are experiencing this kind of transformation....


The paper offers a reflection on the evolution of Occupational Safety approaches through the ages until the Industry 4.0. A brief overview on the constant increase of the system complexity is discussed to introduce the problem. Later, the study shows how Safety can be approached in different ways discussing pros and cons. Then, the paper proposes two applications of Virtual Reality and Augmented Reality...


Although the European panorama is experiencing a profound change in advance to the Industry 4.0, revolutionizing the world of work with technical, technological and information innovations, in Italy even today we have to deal with the “old” problem of work related injuries and fatalities. In particular, the accident indices of the last few years do not seem to differ much from those typical of the...


The role of working spaces in workers’ safety is often neglected and reduced to the building final inspection report. Nevertheless plenty of dangers are originated by the building environment surrounding the working activity: wear and obsolescence of building elements, failure mends and vandalism make the original compliancy fade away. The investigation on the real condition of the rooms where work...


Authors propose a critical overview of the current issues related to the evolution of the role of supervision and of Justice in the OS&H field.


Technological innovations and new risks are affecting the occupational health and safety of workplaces.

In Italy, employers protect themselves with two main insurance coverages: the compulsory Inail (Istituto nazionale per l’assicurazione contro gli...


Accidents and fatalities at work have always had a huge social and economic impact. In recent years the phenomenon in Italy does not seem to regress, indeed, the official data of fatality at work report a significant increase; this notwithstanding the widespread legislative activity both at European and national level.

An...


When major accident scenarios are considered, the effects of major events which give rise to a serious, immediate or deferred danger to human health or the environment, inside or outside the production or storage area due to the presence in high quantities of one or more dangerous substances are being considered. Events of this type, except in exceptional cases, have always had important consequences...


With the beginning of the so called fourth industrial revolution and thanks to the diffusion of new technologies (digital and non-digital), industry is experiencing a deep transformation of those mechanisms through which value, innovation and wealth were historically created. The fourth industrial revolution, which was made possible by the availability of low cost sensors and connections, goes together...


The availability and accessibility of new technologies is also transforming the world of underground construction sites, where applications developed in the mining industry are rapidly spreading.

Many of these have positive repercussions for safety and...


TELT is the public sponsor of one of the world’s most important projects, the cross-border section of the new Turin-Lyon line. In 2015 the company became a member of the United Nations Global Compact, adhering to the ten principles in terms of human rights, the environment, the fight against corruption and compliance with international labour standards. This commitment led to the undertaking to constantly...


The recent directive on the protection of workers from risks related to exposure to carcinogens and mutagens addresses the problem of exposure to crystalline silica.

In view of current scientific knowledge, the directive assigns the role of carcinogen...


Innovative tools are necessary to obtain the optimal operating conditions of the ventilation systems in a reasonable lapse of time and accurately. This can be achieved both with appropriate numerical approaches to the full domain as the model order reduction techniques and with the domain decompositions methods as the multi-scale physical decomposition technique. The reduced order mode techniques such...


A global overview of the technologies that can be applied for modern tunnelling construction taking into account the OS&H aspects is shortly presented in the paper.


The author describes the decision-making processes that led to the adoption of the pedestrian detection system, from the risk analysis phase in the specific site to the management one, through the implementation of the Z-safe project. The completion of the system was possible thanks to the different tests conducted on in situ devices.


Nowadays, occupational exposure to airborne dust is still one of the most concerning problems our society should face, since both airborne dust is a common pollutant in almost all the NACE sectors activities, and the occupational exposure quantification is critical. One of the possible causes can be identified in determining the real conditions of dust pollution in the workplaces, attributable to the...


Nanoremediation technologies are based on the injection of reactive nanomaterials into the subsurface to promote in situ degradation of the pollutants. At present, it appears as a valid and very promising alternative to traditional and already established remediation technologies, such as Pump&Treat, In-Situ Chemical Oxidation (ISCO), air sparging and permeable reactive barriers. Due to their small size, nanoparticles (e.g. nanoscale zerovalent iron) presents a high reactivity and can be exploited to generate a reactive zone to treat a wide...

Description of the material. In this paper a novel methodology for the estimation of the formation permeability, based on the integration of resistivity modeling and near wellbore modeling, is presented. Results obtained from the application to a real case is shown and discussed. The well log interpretation process provides a reliable estimation of the main petrophysical parameters such as porosity, fluid...


The network monitoring system, which has been in operation on the Idro landslide, for several years, shows an average movement of 3 cm to 6 cm a year and defines a displacement area of approximately 270.000 m2. The volume estimation of the landslide is about 5 million cubic meters. The acceleration of the landslide movement is related to the raising of the water table which is linked to increased rainfall....


The original implant map (OI) of Italian Cadaster was first made out of topographical measurements. These maps have never been used for public consultation, but they are the most accurate ones. The publicly accessible maps are named “visure maps” (VM) and were obtained from the original implant maps and consistently updated. However, these maps have suffered many deformations due to continuous...


The wide spreading of vertical greening systems brought to the development of new systems and technologies able to improve urban areas quality. Several benefits derive from the installation of these systems: energy savings for air conditioning during summer, thermal comfort improvement indoor and outdoor, urban heat island mitigation, biodiversity increase, protection of building façades with consequent...


Zandobbio Marble is a crystalline dolomite produced in an open pit quarry near Bergamo, Nord Italy. This ornamental stone was already used during the Roman age. For many years the quarry was inactive, until 2006 when it was re-opened. Local law on quarries requires the elaboration of an exploitation plan: its objective, and in general the objective of the environmental assessment, is to identify areas...


The tunnel Piscopio I is a twin-tube tunnel, 750 m long, included in the works of the Maxilotto 2 DG21/04 of the new highway SS 106 Jonica (Calabria, Southern Italy). During the excavation of the Piscopio I tunnel, several lacks in the Geological Model of Reference emerged. Above all, the discovery of a complex landslide along the left hydrographic side of the Alessi River, which interfered with the tunnel...


The University of Cagliari (Italy) has carried out extensive research on the use and application consultant, La Loggia (TO), Italy of diamond wire in basalt quarries, with the objective of assessing the effectiveness of sawing. The focus of the research has been on time-measurements, in order to produce better data about sawing speed rather than what has already been highly documented by diamond wire...


The complex system of road infrastructures of a country plays a fundamental role both on the economy and on the development of the territory and on the management of accident scenarios that occur as a result of natural disasters. It is therefore essential to assess the vulnerability of the infrastructural network to natural and man-made risk factors in order to identify any critical issues and plan improvements...


The interaction between tunnels and underground water is a complex topic and it is of great relevance taking into account the environment, the protection of drinkable water and the interference with tunnel construction method. Due to the great importance of the topic, in the following are presented and discussed the most relevant technologies for water management in tunnelling with a specific attention...


The aim of this study is to investigate the possible correlation between the value of occupational risk from whole body vibrations and the main anthropometric characteristics of the subjects exposed to such vibrations. Directive 2002/44/EC, which defines the minimum requirements in order to guarantee the health and safety of workers exposed to such a risk, states that Risk Assessment may be conducted...


Stone weathering is strongly controlled by the intrinsic properties of the stone and by its use. Previous studies demonstrate that the response to natural or artificial ageing processes of the rocks seems to be strongly influenced by the pore structure of the stone. A better understanding of this phenomenon is provided by the study and characterization of porosity and of the pore structure at different...


Transport systems are one of the cornerstones of any environmentally sustainable and socially inclusive modern society. It is therefore of critical importance to improve their performances under both these viewpoints. This contribution is presenting a selection of recent research activities carried out by the Transport research group at the Politecnico di Torino – Dept. DIATI that touch at some of these...


Caves are one of the most important and well-known geological features in the world, an environmental and cultural heritage, as well as an important economic resource for many countries. Their scientific and aesthetic value is often threatened by tourism, which unfortunately exposes them to a series of risks of degradation and, sometimes, irreparably changes. Therefore, the study of underground environment...


The adoption of reinforced embankments for rockfall and landslide protection purposes is an effective intervention for the reduction of risk and damages to civil facilities. These earth structures are manufactured with layers of compacted soil alternated with geosynthetics (e.g. geogrids and geotextiles) that are anchored to the outer quarterdeck frame or wrapped around it. This paper discusses the results...


Current population growth, climate change and the increase in derived pollution represent a significant threat to the delicate balance that governs the exploitation of resources on Earth. In recent decades, this balance has been undermined, coming to an over-exploitation condition, or a growing demand for natural raw materials that the planet is no longer able to satisfy, with impacting consequences on...


The majority of rural areas in developing countries live in a state of chronic emergency, due for the most part to the lack of sanitary assistance and food. Covid-19 aggravates this situation, complicating the action of International Cooperation in these countries. To this extent, the case study of the Nosy Mitsio island (Madagascar) is presented. The partnership between H4O, Kukula and Politecnico di...


The paper provides an overview of the several scientific and technical issues and challenges to be addressed for underground storage of carbon dioxide, hydrogen and mixtures of hydrogen and natural gas. The experience gained on underground energy systems and materials is complemented by new competences to adequately respond to the new needs raised by transition from fossil fuels to renewables. The experimental...


In residential buildings, drinking water is often used for tasks that do not necessarily require high quality water, such as home-garden irrigation. Our research focuses on the idea of harvesting rainwater to promote sustainable management of low-quality water resources on a building scale for irrigation purposes. The effectiveness of a collection system depends on the weather conditions, which determine...


The Engineering Geology area studies the physical geography and geomorphology of the “Environment system”. In particular, Engineering Geology deals with the defense of the soil, territory and civil protection, with attention to landslides, hydrogeology, the study of underground water circulation, the geological-technical survey, geological exploration of the subsoil and thematic cartography, geological...


Debris flow events are known today as one of the most dangerous natural hazard events due to the elevated impact pressures they can reach. Depending on its intensity, a debris flow has the capacity to flatten forests and carry along the tree trunks, to completely demolish buildings and consequently to create a great risk to human life.

However,...


Debris flow events are responsible for a fair amount of disasters worldwide that have caused a great deal of damages in the built environment. All the same, this phenomenon has caused many casualties. It is therefore, amongst the most dangerous natural hazards due to the elevated impact pressures it can reach.

Debris...


The aim of this paper is to analyze the factors affecting hydrogen as well as Carbon Capture and Storage Technologies (“CCS”) policies with refer to countries’ upstream capacity of hydrocarbon activities. By using a panel data of 79 countries in 20 years, the interactive model will take into consideration Oil Reserves in relationship with Fossil Fuel Consumption, Blue or Green hydrogen...


Rockfall protection embankments are compelling mitigation measures for those situations involving very high kinetic energy or large blocks and where the slope toe is almost flat. Several systems have been developed, and, among them, reinforced earth embankments allow considerable heights and inclination of the faces up to 70°. Nevertheless, a common procedure for including the dynamic condition, i.e....


A quantitative assessment of the risk of rockfall on a local scale is a complex and challenging task since both the randomness of the natural event and the unpredictability of the behaviour of the elements at risk must be considered. From a technical standpoint, the impact of a block against a building is a phenomenon with a lot of variability, because the location of the impact point on the building...


The National Repository of hydrogeological risk mitigation measures (ReNDiS) is the platform for monitoring measures funded by MiTE from 1999 onwards which aims to managing the evaluation of funding requests coming from Regions. The platform currently contains 6,402 measures for € 6.962 billion and 9,249 project proposals corresponding to € 29.141 billion. In the consistent case history of measures...


Rockfall net fence are a widely adopted rockfall risk mitigation measures, suitable for the great majority of the cases. Nevertheless, in particular complex morphologies, the trajectories of the possible detached blocks can be anomalous, with very high values of both the kinematic parameters of passing height and kinetic energy. In this case, a double line of net fence can be a convenient solution. In...


Rockfall net fences and drapery meshes constitute two of the most adopted protective structural works against rockfall hazard. During their life, they are subject to ageing, corrosion, and impact loads, with a consequent loss of efficiency or even effectiveness. Due to the variability of the environment and, more in general, to external conditions, a definition of a service life, although not unique but...


A proposal for the management of rockfall protection works on complex infrastructure networks such as that of the Autonomous Province of Bolzano through planned inspections. A conscious management requires an adequate planning of inspections and the determination of economically sustainable ‘thresholds’ of intervention. Since it is not possible to predict the frequency of detachments that...



The wear phenomenon plays a fundamental role in excavation work, as it directly affects
times and costs. While prediction models are available in the literature for rock applications,
a standardized procedure for predicting wear is not yet available for soils. In this
work, the Soil Abrasion Test Apparatus (SATA) is used to study the wear dependence from
the moisture content. 6 different types of soils were tested by varying the moisture content
and results were obtained in terms of weight loss...


Demand for metals for renewable energy infrastructure and electric vehicles is likely to increase
in near future, driving up prices. However, mining companies have little appetite for investing in capital-intensive projects with long lead times or for the perennial challenges of permitting so their
strategies aren’t yet focused on the growth. Moreover, the past decade was largely spent rebuilding balance sheets due to low commodities price. The remainder of the decade leads to more cautious choices. Consequentially, to...

The Austrian standard ONR 24810, 2020 regulates the effects of actions, design, construction, monitoring and maintenance of rockfall protection embankments. This standard describes the design concept and the constructions in detail. The basic principles are based on the research results of Hofmann & Mölk, 2012, Hofmann et al., 2013, Hofmann et al., 2017 and Hofmann et al., 2020. The constructions are differentiated into five types depending on the front facing and the geosynthetic reinforcement (Table 2). Type I refers to embankments without...

In recent years, the village of Colsano in the Venosta Valley has witnessed the recurring phenomenon of rock mass collapse. Large blocks from past landslides are still visible on the edge of the valley. The investigation has brought to light the presence of a strongly disintegrated rocky ridge, within a larger and more complex area, strongly disturbed by the presence of a Deep-Seated Gravitational Deformation of the Slope (DSGSD) still studied and examined in depth. The analysis of the kinematisms, in addition to the geological and geomechanical...

Crossing hydrogeological and ecological sensitive aquifers, water ingress can occur, which can lead to irreversible damage to hydrogeological and ecological systems. In order to avoid this, the rock mass surrounding these hydrogeological sensitive tunnel sections is sealed by injections to reduce the hydraulic permeability, the water inflows and consequently the regional water level drawdowns. In deep tunnels, complete sealing is not possible due to the high water pressures.
Residual water volumes will continue to enter the tunnel. The magnitude...

This paper illustrates the geological-technical problems encountered in the design and construction of the Küchelberg road tunnel, which constitutes the second completion lot of the Merano bypass in the province of Bolzano, and in particular the characteristics of the specifically developed monitoring system. The tunnel layout runs in an urban environment with low overburden for approximately 2 km in two clearly distinct geological conditions that affect approximately 50% of the tunnel: the Merano side (west) in alluvial soils, the Passirio side...

The area known as ‘delle roccette’ on the Tonale and Mendola Road shortly after Passo Mendola is subject to rockfall, avalanche and debris flow events. To mitigate risks derived from natural hazards, structural and non-structural mitigation measures have been adopted, such as the establishment of an avalanche commission to provide decision-making support to the Road Service. The evaluation of both efficiency and effectiveness of the measures taken, has been validated by the degree of acceptability of residual risk of human life loss before...

The objective of this review is to analyse the risks associated with the use of fluids in chainsaws
operations, comparing traditional and eco-friendly materials.
We chose to investigate operations involving the use of portable equipment, particularly those that still use internal combustion engines. Indeed, they pose a high risk to operators due to their proximity to the machine. The scientific literature concerning fuel mixtures and chain oils was studied.
Correlating the examined activities, equipment and machines and their materials,...

The Po Plain area in the north of Italy can be considered a natural geological and geophysical laboratory due to its complex geological evolution, particularly from the Miocene to today. Much of our understanding about the subsurface of the Po Plain is due to the large amount of data collected during the period of hydrocarbon exploration in Italy. In total more than 7000 wells have
been drilled and thousands of km of seismic acquisition lines have been acquired. Furthermore, the study of the natural gas fields contributed with additional data...

This article focuses on the evaluation of the oil and gas potential and the investigation of reservoir properties within the terrigenous horizons of the Middle and Lower Jurassic deposits located in the Kandym uplift of the Bukhara-Khiva region. The assessment methodology presented in this study is based on the analysis of geophysical well logging data curves. The authors conducted an analysis using real...


Copper and its alloys are nowadays used for many applications required to support energy transition and their market demand is growing. Due to a still limited re-cycling technology is likely that for the next years the request will be mainly covered by the traditional mining of geological deposits or from the reactivation of abandoned mines. The costs of extraction and production of minerals through open-pit...


The Po Plain in northern Italy is a rapidly subsiding sedimentary basin characterized by a complex geological history that created an extensive fold and fault system that hosts numerous underground hydrocarbon reservoirs. The evolution of the basin is not only governed by natural factors but also by anthropogenic factors that affect both the shallower and deeper sedimentary layers. The Emilia-Romagna...


The Cerchar Abrasivity test is used for assessing the abrasion of rock due to its simplicity and fast execution and it is considered one of the main wear indexes in tunnelling. Despite in standard condition the test is performed on a dry surface of a rock sample, this study introduces the possibility to carry out the test on a conditioned surface. In details, this work compares the Cerchar Abrasivity...


The Bachelor of Science in Environmental and Workplace Prevention Techniques (TPALL) of the University of Turin (UniTo) has also been training technical experts in occupational and environmental safety and health since 2003. Among the total 180 training credits, 24 credits are dedicated to specific engineering content, and deal with both plant design basics, and up-to-date Hazard Identification, Risk...

Submit article

Filters


ISSN 1121-9041

CiteScore:
2020: 3.8
CiteScore measures the average citations received per peer-reviewed document published in this title.
CiteScore values are based on citation counts in a range of four years (e.g. 2016-2019) to peer-reviewed documents (articles, reviews, conference papers, data papers and book chapters) published in the same four calendar years, divided by the number of these documents in these same four years (e.g. 2016 —19).
Source Normalized Impact per Paper (SNIP):
2019: 1.307
SNIP measures contextual citation impact by weighting citations based on the total number of citations in a subject field.
SCImago Journal Rank (SJR)
2019: o.657
SJR is a prestige metric based on the idea that not all citations are the same. SJR uses a similar algorithm as the Google page rank; it provides a quantitative and a qualitative measure of the journal's impact.
Journal Metrics: CiteScore: 1.0 , Source Normalized Impact per Paper (SNIP): 0.381 SCImago Journal Rank (SJR): 0.163

Supported by


Edited by


GEAM - Associazione Georisorse e Ambiente c/o Dipartimento di Ing.dell’Ambiente, del Territorio e delle infrastrutture Politecnico di Torino
Copyright @ GEAM - Designed by DESIGN GANG - Privacy Policy