Submit article

Filters

Find by keywords

"oil reserve"

In mature oilfields, decommissioned oil and gas wells with depths reaching approximately 5000-6000 metres represent good candidate structures for geothermal heat exploitation, as they can provide useful access to subsurface geothermal energy resources. Comprehending the possibility to economically harness geothermal energy by means of coaxial WBHEs is bound to the main features of the physical model,...


This article aims to provide a glance about the current and future applications of Big Data Analytics (BDA) within the Oil&Gas industry, which is searching for an improvement in data managing equal to the improvement in techniques and technologies required by current and future hydrocarbon production. The connection and compatibility of BDA with the hydrocarbon sector is analyzed, highlighting its...


The rapid development of the mechanized tunneling in current decades has raised serious concerns about the environmental impact of large quantities of the muck. EPB-TBMs require the use of foaming agents for optimizing the soil conditioning. These agents could contain some chemicals (e.g., sodium lauryl ether sulfate – SLES) that are not included in the current legislation at the Italian or EU level....


Nanoremediation technologies are based on the injection of reactive nanomaterials into the subsurface to promote in situ degradation of the pollutants. At present, it appears as a valid and very promising alternative to traditional and already established remediation technologies, such as Pump&Treat, In-Situ Chemical Oxidation (ISCO), air sparging and permeable reactive barriers. Due to their small size, nanoparticles (e.g. nanoscale zerovalent iron) presents a high reactivity and can be exploited to generate a reactive zone to treat a wide...

The aim of this paper is to analyze the factors affecting hydrogen as well as Carbon Capture and Storage Technologies (“CCS”) policies with refer to countries’ upstream capacity of hydrocarbon activities. By using a panel data of 79 countries in 20 years, the interactive model will take into consideration Oil Reserves in relationship with Fossil Fuel Consumption, Blue or Green hydrogen...



The wear phenomenon plays a fundamental role in excavation work, as it directly affects
times and costs. While prediction models are available in the literature for rock applications,
a standardized procedure for predicting wear is not yet available for soils. In this
work, the Soil Abrasion Test Apparatus (SATA) is used to study the wear dependence from
the moisture content. 6 different types of soils were tested by varying the moisture content
and results were obtained in terms of weight loss...

This article focuses on the evaluation of the oil and gas potential and the investigation of reservoir properties within the terrigenous horizons of the Middle and Lower Jurassic deposits located in the Kandym uplift of the Bukhara-Khiva region. The assessment methodology presented in this study is based on the analysis of geophysical well logging data curves. The authors conducted an analysis using real...


In this paper, we discuss how to describe the geomechanical behavior of geological formations used for underground fluid storage through the application of the Virtual Element Method (VEM) on conforming polyhedral meshes for the solution of stress-strain equilibrium equations. Under the assumption of small deformations, the solution algorithm for an Isotropic Linear Elastic (ILE) constitutive law coupled...

Submit article

Filters


ISSN 1121-9041

CiteScore:
2020: 3.8
CiteScore measures the average citations received per peer-reviewed document published in this title.
CiteScore values are based on citation counts in a range of four years (e.g. 2016-2019) to peer-reviewed documents (articles, reviews, conference papers, data papers and book chapters) published in the same four calendar years, divided by the number of these documents in these same four years (e.g. 2016 —19).
Source Normalized Impact per Paper (SNIP):
2019: 1.307
SNIP measures contextual citation impact by weighting citations based on the total number of citations in a subject field.
SCImago Journal Rank (SJR)
2019: o.657
SJR is a prestige metric based on the idea that not all citations are the same. SJR uses a similar algorithm as the Google page rank; it provides a quantitative and a qualitative measure of the journal's impact.
Journal Metrics: CiteScore: 1.0 , Source Normalized Impact per Paper (SNIP): 0.381 SCImago Journal Rank (SJR): 0.163

Supported by


Edited by


GEAM - Associazione Georisorse e Ambiente c/o Dipartimento di Ing.dell’Ambiente, del Territorio e delle infrastrutture Politecnico di Torino
Copyright @ GEAM - Designed by DESIGN GANG - Privacy Policy