Since the last decade, numerous free and open-source software (FOSS) has been developed: this new approach, thanks to its quick update and its affordability, has guaranteed the employment of FOSS both by public and private bodies. In the field of open tools, the development of geographic software (GFOSS) became particularly relevant, whose distribution increased enormously and whose innovations are constantly...
Mechanical behaviour of clastic formations at shallow – medium depths which bear hydrocarbon reservoirs could exhibit an important non-linear influence of the strain on the formation stiffness during depletion. Particularly in the early reservoir production stage, characterized by high uncertainty and little ground movement data for back-analysis, reliable determination of formation stiffness at...
The residual presence of critical components (e.g. Asbestos Containing Materials – ACMs) still represents one of the main criticalities for the Occupational Safety and Health – OS&H in many large public facilities. The very first step for an effective Risk Assessment and Management is obviously a clear definition of the different approaches, complying with the Italian general and special OS&H...
The building sector is considered strategic to reach new scenarios for a low-carbon society. Beside this awareness, in the current trend there is not a real change to achieve targets set in terms of emissions containment defined by international agreements. Through an econometric model based on Choice Experiments, the present study aims to understand the individuals’ perceptions towards energy retrofit...
Deep aquifers represent a strategic resource because of their quality, generally better than rivers and shallow aquifers. More specifically, in Piedmont Region (Italy) they represent a key source of drinking water and therefore must be protected from qualitative and quantitative degradation.
In...
The residual presence of critical components (e.g. Asbestos Containing Materials – ACMs) still represents one of the main criticalities for the Occupational Safety and Health – OS&H in many large public facilities (Lee and Van Orden, 2007).
Since...
The management of health and safety at work is represented by the set of preventive and protective measures to minimize the exposure of workers to risks that may cause the onset of diseases or increase the number of accidents.
Data on occupational accidents...
Although the European panorama is experiencing a profound change in advance to the Industry 4.0, revolutionizing the world of work with technical, technological and information innovations, in Italy even today we have to deal with the “old” problem of work related injuries and fatalities. In particular, the accident indices of the last few years do not seem to differ much from those typical of the...
The author describes the decision-making processes that led to the adoption of the pedestrian detection system, from the risk analysis phase in the specific site to the management one, through the implementation of the Z-safe project. The completion of the system was possible thanks to the different tests conducted on in situ devices.
Nowadays, occupational exposure to airborne dust is still one of the most concerning problems our society should face, since both airborne dust is a common pollutant in almost all the NACE sectors activities, and the occupational exposure quantification is critical. One of the possible causes can be identified in determining the real conditions of dust pollution in the workplaces, attributable to the...
The University of Cagliari (Italy) has carried out extensive research on the use and application consultant, La Loggia (TO), Italy of diamond wire in basalt quarries, with the objective of assessing the effectiveness of sawing. The focus of the research has been on time-measurements, in order to produce better data about sawing speed rather than what has already been highly documented by diamond wire...
The interaction between tunnels and underground water is a complex topic and it is of great relevance taking into account the environment, the protection of drinkable water and the interference with tunnel construction method. Due to the great importance of the topic, in the following are presented and discussed the most relevant technologies for water management in tunnelling with a specific attention...
The aim of this study is to investigate the possible correlation between the value of occupational risk from whole body vibrations and the main anthropometric characteristics of the subjects exposed to such vibrations. Directive 2002/44/EC, which defines the minimum requirements in order to guarantee the health and safety of workers exposed to such a risk, states that Risk Assessment may be conducted...
The paper provides an overview of the several scientific and technical issues and challenges to be addressed for underground storage of carbon dioxide, hydrogen and mixtures of hydrogen and natural gas. The experience gained on underground energy systems and materials is complemented by new competences to adequately respond to the new needs raised by transition from fossil fuels to renewables. The experimental...
The National Repository of hydrogeological risk mitigation measures (ReNDiS) is the platform for monitoring measures funded by MiTE from 1999 onwards which aims to managing the evaluation of funding requests coming from Regions. The platform currently contains 6,402 measures for € 6.962 billion and 9,249 project proposals corresponding to € 29.141 billion. In the consistent case history of measures...
Rockfall net fence are a widely adopted rockfall risk mitigation measures, suitable for the great majority of the cases. Nevertheless, in particular complex morphologies, the trajectories of the possible detached blocks can be anomalous, with very high values of both the kinematic parameters of passing height and kinetic energy. In this case, a double line of net fence can be a convenient solution. In...
Rockfall net fences and drapery meshes constitute two of the most adopted protective structural works against rockfall hazard. During their life, they are subject to ageing, corrosion, and impact loads, with a consequent loss of efficiency or even effectiveness. Due to the variability of the environment and, more in general, to external conditions, a definition of a service life, although not unique but...
,
Source Normalized Impact per Paper (SNIP): 0.381
SCImago Journal Rank (SJR): 0.163
