Submit article

Filters

Find by keywords

"rock engineering system"
Rockfall is one of the most hazardous and dangerous landslide phenomena, which can significantly affect mountain roads. To the knowledge of the Author, limited studies focus on the quantitative risk assessment to pedestrians (hikers) and vehicles along mountain little traffic roads. A method tailored to these elements at risk is herein presented and applied to a real case. The calculation method is based on the Event-Tree Analysis, through which all the scenarios which can lead to a fatality or injuries are investigated. An application on a study...

The fragmentation process of the falling blocks is a key aspect in the study and the simulation of rockfall phenomenon. The single blocs can generate fragments, deviating their trajectory, modifying their energy. The present research describes an application of a fractal fragmentation model on a real study case and identifies the main issues that can rise. A multi-objective procedure to define model parameters...


This paper presents a quick and multiparametric method for shallow landslides susceptibility and hazard zoning, based on the principles of the Rock Engineering System (RES). The implementation of this methodology is achieved through the identification of the most sensitive triggering parameters and the study of their interrelationships. An interaction matrix is used to define a susceptibility index. The...


Rockfall net fences are multicomponent protection devices for mitigating rockfall hazard. As passive measures, they are used to intercept and stop rock blocks propagation after their detachment from a cliff or a slope. During their design working life, net fences subjected to ageing phenomena, corrosion and impact loads, causing their efficiency loss or even their effectiveness. A multi-matricial procedure...


Geothermal Energy, being a clean and sustainable source of energy, is gaining importance worldwide due to various reasons. Geothermal power can be generated throughout the year on twenty four hour basis as it’s not much dependent on ambient temperature and weather conditions. Recently there is an increased interest in exploitation of low enthalpy geothermal resources for other applications such as geothermal space heating...


The main purpose of developing OSH Management System is to create a sustainable system that does not rely solely on a specific person with OSH expertise. This concept is the core of the International Organization for Standardization – ISO standards which promote the creation of a sustainable system based on the assumption that humans make mistakes. Then, it is argued that government regulations may...


The paper offers a reflection on the evolution of Occupational Safety approaches through the ages until the Industry 4.0. A brief overview on the constant increase of the system complexity is discussed to introduce the problem. Later, the study shows how Safety can be approached in different ways discussing pros and cons. Then, the paper proposes two applications of Virtual Reality and Augmented Reality...


Accidents and fatalities at work have always had a huge social and economic impact. In recent years the phenomenon in Italy does not seem to regress, indeed, the official data of fatality at work report a significant increase; this notwithstanding the widespread legislative activity both at European and national level.

An...


The wide spreading of vertical greening systems brought to the development of new systems and technologies able to improve urban areas quality. Several benefits derive from the installation of these systems: energy savings for air conditioning during summer, thermal comfort improvement indoor and outdoor, urban heat island mitigation, biodiversity increase, protection of building façades with consequent...


The adoption of reinforced embankments for rockfall and landslide protection purposes is an effective intervention for the reduction of risk and damages to civil facilities. These earth structures are manufactured with layers of compacted soil alternated with geosynthetics (e.g. geogrids and geotextiles) that are anchored to the outer quarterdeck frame or wrapped around it. This paper discusses the results...


Current population growth, climate change and the increase in derived pollution represent a significant threat to the delicate balance that governs the exploitation of resources on Earth. In recent decades, this balance has been undermined, coming to an over-exploitation condition, or a growing demand for natural raw materials that the planet is no longer able to satisfy, with impacting consequences on...


The Engineering Geology area studies the physical geography and geomorphology of the “Environment system”. In particular, Engineering Geology deals with the defense of the soil, territory and civil protection, with attention to landslides, hydrogeology, the study of underground water circulation, the geological-technical survey, geological exploration of the subsoil and thematic cartography, geological...


Rockfall protection embankments are compelling mitigation measures for those situations involving very high kinetic energy or large blocks and where the slope toe is almost flat. Several systems have been developed, and, among them, reinforced earth embankments allow considerable heights and inclination of the faces up to 70°. Nevertheless, a common procedure for including the dynamic condition, i.e....


A quantitative assessment of the risk of rockfall on a local scale is a complex and challenging task since both the randomness of the natural event and the unpredictability of the behaviour of the elements at risk must be considered. From a technical standpoint, the impact of a block against a building is a phenomenon with a lot of variability, because the location of the impact point on the building...


The Petra Archaeological Park, a UNESCO World Heritage site since 1985, is characterized by a spectacular landscape but also by a great fragility fragile being prone to a diversity of natural risks (e.g. landslides, flash-floods, earthquakes) which can cause a potential danger to cultural heritage and visitors. The ‘Siq’, a natural canyon which constitutes the main entrance to the archaeological...


Rockfall net fence are a widely adopted rockfall risk mitigation measures, suitable for the great majority of the cases. Nevertheless, in particular complex morphologies, the trajectories of the possible detached blocks can be anomalous, with very high values of both the kinematic parameters of passing height and kinetic energy. In this case, a double line of net fence can be a convenient solution. In...


Rockfall net fences and drapery meshes constitute two of the most adopted protective structural works against rockfall hazard. During their life, they are subject to ageing, corrosion, and impact loads, with a consequent loss of efficiency or even effectiveness. Due to the variability of the environment and, more in general, to external conditions, a definition of a service life, although not unique but...


A proposal for the management of rockfall protection works on complex infrastructure networks such as that of the Autonomous Province of Bolzano through planned inspections. A conscious management requires an adequate planning of inspections and the determination of economically sustainable ‘thresholds’ of intervention. Since it is not possible to predict the frequency of detachments that...


The Austrian standard ONR 24810, 2020 regulates the effects of actions, design, construction, monitoring and maintenance of rockfall protection embankments. This standard describes the design concept and the constructions in detail. The basic principles are based on the research results of Hofmann & Mölk, 2012, Hofmann et al., 2013, Hofmann et al., 2017 and Hofmann et al., 2020. The constructions are differentiated into five types depending on the front facing and the geosynthetic reinforcement (Table 2). Type I refers to embankments without...

This paper illustrates the geological-technical problems encountered in the design and construction of the Küchelberg road tunnel, which constitutes the second completion lot of the Merano bypass in the province of Bolzano, and in particular the characteristics of the specifically developed monitoring system. The tunnel layout runs in an urban environment with low overburden for approximately 2 km in two clearly distinct geological conditions that affect approximately 50% of the tunnel: the Merano side (west) in alluvial soils, the Passirio side...

The area known as ‘delle roccette’ on the Tonale and Mendola Road shortly after Passo Mendola is subject to rockfall, avalanche and debris flow events. To mitigate risks derived from natural hazards, structural and non-structural mitigation measures have been adopted, such as the establishment of an avalanche commission to provide decision-making support to the Road Service. The evaluation of both efficiency and effectiveness of the measures taken, has been validated by the degree of acceptability of residual risk of human life loss before...
Submit article

Filters


ISSN 1121-9041

CiteScore:
2020: 3.8
CiteScore measures the average citations received per peer-reviewed document published in this title.
CiteScore values are based on citation counts in a range of four years (e.g. 2016-2019) to peer-reviewed documents (articles, reviews, conference papers, data papers and book chapters) published in the same four calendar years, divided by the number of these documents in these same four years (e.g. 2016 —19).
Source Normalized Impact per Paper (SNIP):
2019: 1.307
SNIP measures contextual citation impact by weighting citations based on the total number of citations in a subject field.
SCImago Journal Rank (SJR)
2019: o.657
SJR is a prestige metric based on the idea that not all citations are the same. SJR uses a similar algorithm as the Google page rank; it provides a quantitative and a qualitative measure of the journal's impact.
Journal Metrics: CiteScore: 1.0 , Source Normalized Impact per Paper (SNIP): 0.381 SCImago Journal Rank (SJR): 0.163

Supported by


Edited by


GEAM - Associazione Georisorse e Ambiente c/o Dipartimento di Ing.dell’Ambiente, del Territorio e delle infrastrutture Politecnico di Torino
Copyright @ GEAM - Designed by DESIGN GANG - Privacy Policy