Submit article

Filters

Find by keywords

"po plain"
In the last years, energy transition from fossil fuels to renewable resources has been largely acknowledged as a necessity to reduce emissions of greenhouse gases in the atmosphere. Hydrogen, the simplest element on Earth, can play an important role in this transition. It is not as an energy source but rather as an energy carrier: in layman’s terms, electricity is converted in chemical energy, which can then be converted again in electricity or in green methane, if combined with carbon...

The article examines the peculiarities of creation (updating) digital topographic maps of the scale 1:50 000 for the Main State Topographic Map of Ukraine for creation and maintaining the seamless topographic database for national needs, which is located on the Geoportal to ensure the development of the National Spatial Data Infrastructure (NSDI) in Ukraine. Several special problems were identified along...


The residual presence of critical components (e.g. Asbestos Containing Materials – ACMs) still represents one of the main criticalities for the Occupational Safety and Health – OS&H in many large public facilities. The very first step for an effective Risk Assessment and Management is obviously a clear definition of the different approaches, complying with the Italian general and special OS&H...


Indoor Air Quality (IAQ) is related to human health and well-being since people spend most of their working and free time in interior spaces. As stated by the World Health Organization (WHO), once complying with normative Occupational Safety and Health (OS&H) limits, more elevated standards of air quality both in productive and non-industrial workplaces should be guaranteed. In this case study –...


The large use of nanomaterials in several industrial processes drove the attention toward the potential health issues associated to their diffusion in the environment. However, since nanomaterials are characterized by a polidisperse particle size distribution, the human health risk induced by a nanoparticle (NP) contamination cannot be assessed through the ASTM procedure commonly used for chemicals. Toxicity...


The building sector is considered strategic to reach new scenarios for a low-carbon society. Beside this awareness, in the current trend there is not a real change to achieve targets set in terms of emissions containment defined by international agreements. Through an econometric model based on Choice Experiments, the present study aims to understand the individuals’ perceptions towards energy retrofit...


The inflow into aquifers of transition metals leached from muck disposed in quarries is a process that requires a detailed analysis in the framework of the environmental impact studies of dump sites. It is important to thoroughly examine the risks of potential contamination of pre-existing groundwater wells and, more in general, to assess the risk of qualitative deterioration of nearby shallow aquifers....


Harmonic Pulse Testing was introduced in the early 1970’s as a special case of pulse testing. It is characterized by a periodic variation of production/injection rate. Subsequent developments proved that it could provide the same information as a conventional well test (permeability and skin, heterogeneity) in addition to those given by a pulse test (areal connectivity within the reservoir) if proper...


Pulp and paper mills are characterized by emissions of malodorous gases that commonly create discomfort for people, also in little concentration in the air. This issue is crucial for enterprises that are not actually using the best available technology for reducing non-condensable gases. Thereby, for existing enterprises, it is very important to realize the proper suitable upgrading by choosing the best...


The paper presents the results of an experimental campaign carried out at the Sasso Poiano mine, close to Varese, northern Italy. The area is near a historic site, inhabited villages and a well-known lake, so that the use of explosive is subject to severe restrictions imposed by Italian standards. The exploitation is therefore carried out by blasting with low specific charge (PF=50 g/m3) in order to obtain...


The two-component backfilling system is the most frequently used method to fill the annular gap created during the shield machine advancement. This gap, due to the head overcut, the shield thickness and conicity and the tail brushes size should be filled continuously in order to avoid mainly surface displacement and linings movements. Nowadays this technology is the most chosen due to operative (both...


In mature oilfields, decommissioned oil and gas wells with depths reaching approximately 5000-6000 metres represent good candidate structures for geothermal heat exploitation, as they can provide useful access to subsurface geothermal energy resources. Comprehending the possibility to economically harness geothermal energy by means of coaxial WBHEs is bound to the main features of the physical model,...


Deep aquifers represent a strategic resource because of their quality, generally better than rivers and shallow aquifers. More specifically, in Piedmont Region (Italy) they represent a key source of drinking water and therefore must be protected from qualitative and quantitative degradation.

In...


Geothermal Energy, being a clean and sustainable source of energy, is gaining importance worldwide due to various reasons. Geothermal power can be generated throughout the year on twenty four hour basis as it’s not much dependent on ambient temperature and weather conditions. Recently there is an increased interest in exploitation of low enthalpy geothermal resources for other applications such as geothermal space heating...


The management of health and safety at work is represented by the set of preventive and protective measures to minimize the exposure of workers to risks that may cause the onset of diseases or increase the number of accidents.

Data on occupational accidents...


The paper offers a reflection on the evolution of Occupational Safety approaches through the ages until the Industry 4.0. A brief overview on the constant increase of the system complexity is discussed to introduce the problem. Later, the study shows how Safety can be approached in different ways discussing pros and cons. Then, the paper proposes two applications of Virtual Reality and Augmented Reality...


The role of working spaces in workers’ safety is often neglected and reduced to the building final inspection report. Nevertheless plenty of dangers are originated by the building environment surrounding the working activity: wear and obsolescence of building elements, failure mends and vandalism make the original compliancy fade away. The investigation on the real condition of the rooms where work...


The recent directive on the protection of workers from risks related to exposure to carcinogens and mutagens addresses the problem of exposure to crystalline silica.

In view of current scientific knowledge, the directive assigns the role of carcinogen...


Nowadays, occupational exposure to airborne dust is still one of the most concerning problems our society should face, since both airborne dust is a common pollutant in almost all the NACE sectors activities, and the occupational exposure quantification is critical. One of the possible causes can be identified in determining the real conditions of dust pollution in the workplaces, attributable to the...


The tunnel Piscopio I is a twin-tube tunnel, 750 m long, included in the works of the Maxilotto 2 DG21/04 of the new highway SS 106 Jonica (Calabria, Southern Italy). During the excavation of the Piscopio I tunnel, several lacks in the Geological Model of Reference emerged. Above all, the discovery of a complex landslide along the left hydrographic side of the Alessi River, which interfered with the tunnel...


The aim of this study is to investigate the possible correlation between the value of occupational risk from whole body vibrations and the main anthropometric characteristics of the subjects exposed to such vibrations. Directive 2002/44/EC, which defines the minimum requirements in order to guarantee the health and safety of workers exposed to such a risk, states that Risk Assessment may be conducted...


Stone weathering is strongly controlled by the intrinsic properties of the stone and by its use. Previous studies demonstrate that the response to natural or artificial ageing processes of the rocks seems to be strongly influenced by the pore structure of the stone. A better understanding of this phenomenon is provided by the study and characterization of porosity and of the pore structure at different...


Transport systems are one of the cornerstones of any environmentally sustainable and socially inclusive modern society. It is therefore of critical importance to improve their performances under both these viewpoints. This contribution is presenting a selection of recent research activities carried out by the Transport research group at the Politecnico di Torino – Dept. DIATI that touch at some of these...


The paper provides an overview of the several scientific and technical issues and challenges to be addressed for underground storage of carbon dioxide, hydrogen and mixtures of hydrogen and natural gas. The experience gained on underground energy systems and materials is complemented by new competences to adequately respond to the new needs raised by transition from fossil fuels to renewables. The experimental...


In residential buildings, drinking water is often used for tasks that do not necessarily require high quality water, such as home-garden irrigation. Our research focuses on the idea of harvesting rainwater to promote sustainable management of low-quality water resources on a building scale for irrigation purposes. The effectiveness of a collection system depends on the weather conditions, which determine...


The Engineering Geology area studies the physical geography and geomorphology of the “Environment system”. In particular, Engineering Geology deals with the defense of the soil, territory and civil protection, with attention to landslides, hydrogeology, the study of underground water circulation, the geological-technical survey, geological exploration of the subsoil and thematic cartography, geological...


The Po Plain area in the north of Italy can be considered a natural geological and geophysical laboratory due to its complex geological evolution, particularly from the Miocene to today. Much of our understanding about the subsurface of the Po Plain is due to the large amount of data collected during the period of hydrocarbon exploration in Italy. In total more than 7000 wells have
been drilled and thousands of km of seismic acquisition lines have been acquired. Furthermore, the study of the natural gas fields contributed with additional data...

This article focuses on the evaluation of the oil and gas potential and the investigation of reservoir properties within the terrigenous horizons of the Middle and Lower Jurassic deposits located in the Kandym uplift of the Bukhara-Khiva region. The assessment methodology presented in this study is based on the analysis of geophysical well logging data curves. The authors conducted an analysis using real...


The Po Plain in northern Italy is a rapidly subsiding sedimentary basin characterized by a complex geological history that created an extensive fold and fault system that hosts numerous underground hydrocarbon reservoirs. The evolution of the basin is not only governed by natural factors but also by anthropogenic factors that affect both the shallower and deeper sedimentary layers. The Emilia-Romagna...


The Cerchar Abrasivity test is used for assessing the abrasion of rock due to its simplicity and fast execution and it is considered one of the main wear indexes in tunnelling. Despite in standard condition the test is performed on a dry surface of a rock sample, this study introduces the possibility to carry out the test on a conditioned surface. In details, this work compares the Cerchar Abrasivity...

Submit article

Filters


ISSN 1121-9041

CiteScore:
2020: 3.8
CiteScore measures the average citations received per peer-reviewed document published in this title.
CiteScore values are based on citation counts in a range of four years (e.g. 2016-2019) to peer-reviewed documents (articles, reviews, conference papers, data papers and book chapters) published in the same four calendar years, divided by the number of these documents in these same four years (e.g. 2016 —19).
Source Normalized Impact per Paper (SNIP):
2019: 1.307
SNIP measures contextual citation impact by weighting citations based on the total number of citations in a subject field.
SCImago Journal Rank (SJR)
2019: o.657
SJR is a prestige metric based on the idea that not all citations are the same. SJR uses a similar algorithm as the Google page rank; it provides a quantitative and a qualitative measure of the journal's impact.
Journal Metrics: CiteScore: 1.0 , Source Normalized Impact per Paper (SNIP): 0.381 SCImago Journal Rank (SJR): 0.163

Supported by


Edited by


GEAM - Associazione Georisorse e Ambiente c/o Dipartimento di Ing.dell’Ambiente, del Territorio e delle infrastrutture Politecnico di Torino
Copyright @ GEAM - Designed by DESIGN GANG - Privacy Policy